Propuesta de control de calidad en el proceso de soldadura para la fabricación de naves industriales - Proyecto Central Hidromanta, Lima, 2018
Abstract
En el presente trabajo de tesis tiene como objetivo principal establecer un sistema de control de calidad para cada etapa del proceso de soldadura en la fabricación de naves industriales de acuerdo a la Norma AWS D1.1–2015, para esto se desarrolló distintos instructivos, criterios de aceptación, procedimientos de soldadura y la homologación de los soldadores para evaluar su destreza en la fabricación de una nave industrial para el proyecto Hidromanta. En cada capítulo se detalla el correcto manejo de la Normativa correspondiente al proceso de soldadura.
En este trabajo se analiza la influencia de las distintas propiedades del acero en el proceso de soldadura y cómo influye el aporte de calor en la formación discontinuidades y hacer la interpretación de acuerdo a las tablas y referencias de la norma AWS D1.1–2015.
Se determinó los controles que se debe realizar en cada etapa del proceso de soldadura, desde la recepción de los materiales, evaluar la mano de obra y el correcto proceso a emplear, para esto se elaboró procedimientos e instructivos que sirven de guía para la correcta interpretación de los Ensayos no Destructivos (NDT) a usar en la fabricación de naves industriales.
Por último se evalúo la soldabilidad de los elementos estructurales (vigas laminadas) de acuerdo a la norma AWS D1.1–2015, analizando el carbono equivalente que influye en la aparición de hidrógeno y evitar posibles fisuras en las áreas soldadas.
Se recomienda seguir la directriz propuesta en este trabajo, o sea, primero revisar el estudio del código de soldadura, luego los procedimientos-guía, y finalmente los instructivos de llenado de los formatos.
Mostrar más
The present work was to establish a quality control system for each stage that demands the welding process according to AWS D1.1 - 2015, for this we will develop welding procedures and the approval of the welders to evaluate their Dexterity in the manufacture of an industrial warehouse for the Hidromanta project. In each chapter we will detail the correct handling of the Norm corresponding to the welding process.
The influence of the different properties of the steel in the welding process was analyzed and how the contributions of heat in the formation of discontinuities influences and make the interpretation according to the tables and references of the AWS D1.1 - 2015 standard.
It was determined the controls that must be carried out in each stage of the welding process, from the reception of the materials, to evaluate the labor and the correct process to be used, for this procedure and instructions were elaborated that serve as a guide for the correct interpretation of the Non-Destructive Tests (NDT) to be used in the manufacturing of the industrial warehouse.
Finally, the weldability of the structural elements (laminated beams) was evaluated according to the AWS D1.1-2015 standard, analyzing the equivalent carbon that influences the appearance of hydrogen and avoiding cracks in the welded areas.
It is recommended to follow the guideline proposed in this project, that is, first review the study of the code, then the procedures-guide, and finally the instructions for filling the forms.
Mostrar más
Bibliographic citation
Huaras, D. A. (2018). Propuesta de control de calidad en el proceso de soldadura para la fabricación de naves industriales - Proyecto Central Hidromanta, Lima, 2018 [Trabajo de suficiencia profesional, Universidad Privada del Norte]. Repositorio de la Universidad Privada del Norte. https://hdl.handle.net/11537/15219
Collections
Related items
Showing items related by title, author, creator and subject.
-
Propuesta de mejora de proceso en el área de soldadura, aplicando la norma AWS D1.1 con un WPS en la empresa Suministro de Fabricación y Construcción SAC - 2017
Valverde Vargas, Antenor (Universidad Privada del Norte, 2018-01-30)Acceso cerradoRESUMEN El siguiente trabajo de mejora es un análisis de la situación de la realidad actual con la propuesta de mejora de los problemas que se dan en el área de soldadura de la empresa Suministro de Fabricación y Construcción ... -
Mejora en los procesos de fabricación de tanques de almacenamiento verticales bajo la norma API 650 para incrementar la rentabilidad, en Lima 2019
Cusinga Arenas, Oscar (Universidad Privada del Norte, 2021-03-17)Acceso abiertoHoy en día el desarrollo y ejecución de los proyectos muestran que uno de mayores problemas que se presentan en sus actividades es debido a las demoras en los tiempos de ejecución del montaje, debido principalmente a los ... -
Influencia de la disposición de planta en la productividad de spools de la empresa metalmecánica Fima, 2016
Alvarado Hinostroza, Miguel; Macedo Geronimo, Edgar (Universidad Privada del Norte, 2017-07-11)Acceso abiertoRESUMEN La presente investigación nace de la necesidad de mejorar los procesos productivos y elevar la productividad de la empresa, para esto un factor fundamental es la disposición de planta con una adecuada utilización ...