dc.contributor.advisor | Mejía Díaz, Iván Hedilbrando | |
dc.contributor.author | Soto Lozano, Elvira Elizabeth | |
dc.date.accessioned | 2018-01-27T17:47:32Z | |
dc.date.available | 2018-01-27T17:47:32Z | |
dc.date.issued | 2018-01-05 | |
dc.identifier.citation | Soto, E. E. (2016). Resistencia a compresión y flexión del adobe compactado con incorporación de bentonita sódica, utilizando suelos de diferentes canteras, Cajamarca 2016 [Tesis de licenciatura, Universidad Privada del Norte]. Repositorio de la Universidad Privada del Norte. https://hdl.handle.net/11537/12677 | es_PE |
dc.identifier.other | 624 SOTO 2016 | es_PE |
dc.identifier.uri | https://hdl.handle.net/11537/12677 | |
dc.description.abstract | La presente tesis tuvo como objetivo principal analizar la resistencia a compresión y flexión del
adobe compactado, elaborado con la máquina CINVA RAM y con incorporación de bentonita sódica.
La investigación se basó fundamentalmente en clasificar tres tipos de suelo de diferentes distritos
de Cajamarca los cuales sean aptos para la elaboración de adobes compactados, dosificar los tres
tipos de suelo en diferentes niveles de incorporación de bentonita sódica (8, 12 y 16%); para luego
evaluar sus efectos en la resistencia a la compresión y flexión y comparar los resultados, con los de
un adobe compactado sin incorporación y también ser comparados con la resistencia mínima a
compresión indicada por la norma E.080 (12kg/cm2). Los resultados fueron satisfactorios
independientemente para cada tipo de suelo, la incorporación de bentonita sódica, en porcentajes
de 8, 12 y 16 % en el adobe compactado, mejora sus propiedades mecánicas, en resistencia a
compresión a más del 20% con respecto al valor encontrado para la muestra patrón (sin adición) y
el valor mínimo de resistencia a compresión que indica la norma E.080, en resistencia a flexión los
resultados dieron mayor al 10% con respecto a la muestra patrón. Independientemente de cada tipo
de suelo y con incorporación de bentonita sódica, se alcanzaron valores de resistencia a la
compresión, llegando hasta, 42.18kg/cm2, con 16% de incorporación de bentonita sódica, los cuales
se aproximan a un bloque de clase P (bloque portante 50kg/cm2), de acuerdo a la norma E. 070 –
Albañilería. | es_PE |
dc.description.abstract | The main objective of this thesis was to analyze the compressive and flexural strength of the
compacted adobe, made with the CINVA RAM machine and with the incorporation of sodium
bentonite.
The investigation was based fundamentally on classifying three soil types from different districts of
Cajamarca which are suitable for the elaboration of compacted adobes, dosing the three types of
soil at different levels of incorporation of sodium bentonite (8, 12 and 16%); to then evaluate its
effects on the resistance to compression and bending and compare the results, with those of a
compacted adobe without incorporation and also be compared with the minimum resistance to
compression indicated by the E.080 standard (12kg7cm2). The results were satisfactory
independently for each type of soil, the incorporation of sodium bentonite, in percentages of 8, 12
and 16% in the compacted adobe, improves its mechanical properties, in compression resistance to
more than 20% with respect to the value found for the standard sample (without addition) and the
minimum value of compressive strength indicated by the E.080 standard, in flexural strength the
results were greater than 10% with respect to the standard sample. Regardless of each type of soil
and with the incorporation of sodium bentonite, values of compressive strength were reached,
reaching up to 42.18 kg / cm2, with 16% incorporation of sodium bentonite, which approximate a
block of class P (loading block 50kg / cm2), according to standard E. 070 - Masonry. | es_PE |
dc.description.uri | Tesis | es_PE |
dc.format | application/pdf | es_PE |
dc.format | application/msword | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Privada del Norte | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-sa/3.0/us/ | * |
dc.source | Universidad Privada del Norte | es_PE |
dc.source | Repositorio Institucional - UPN | es_PE |
dc.subject | Resistencia a la compresión | es_PE |
dc.subject | Suelos | es_PE |
dc.subject | Albañilería | es_PE |
dc.title | Resistencia a compresión y flexión del adobe compactado con incorporación de bentonita sódica, utilizando suelos de diferentes canteras, Cajamarca 2016 | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.grantor | Universidad Privada del Norte. Facultad de Ingeniería | es_PE |
thesis.degree.level | Título Profesional | es_PE |
thesis.degree.discipline | Ingeniería Civil | es_PE |
thesis.degree.name | Ingeniero Civil | es_PE |
dc.publisher.country | PE | es_PE |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.01.01 | es_PE |
thesis.degree.program | Pregrado | es_PE |
dc.description.sede | Cajamarca | es_PE |
renati.advisor.dni | 46448663 | |
renati.advisor.orcid | https://orcid.org/0000-0002-3033-9262 | es_PE |
renati.author.dni | 72684200 | |
renati.discipline | 732016 | es_PE |
renati.juror | Aguilar Aliaga, Orlando | |
renati.juror | Quispe Rodríguez, Gerson | |
renati.juror | Alva Sarmiento, Anita | |
renati.level | https://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.type | https://purl.org/pe-repo/renati/type#tesis | es_PE |