dc.contributor.advisor | Mendoza Azañero, Ana Rosa | |
dc.contributor.author | Miranda Medina, Vanessa Margot | |
dc.contributor.author | Oblitas Murrugarra, Julia Teresa | |
dc.date.accessioned | 2018-11-16T22:41:29Z | |
dc.date.available | 2018-11-16T22:41:29Z | |
dc.date.issued | 2018-10-29 | |
dc.identifier.citation | Miranda, V. M., & Oblitas, J. T. (2018). Propuesta de implementación de un sistema de gestión de seguridad y salud en el trabajo basado en la norma OHSAS 18001:2007 para reducir los riesgos en el área de producción de la empresa Agroandino SRL-San Pablo (Tesis de licenciatura). Repositorio de la Universidad Privada del Norte. Recuperado de http://hdl.handle.net/11537/14100 | es_PE |
dc.identifier.other | 670.56 MIRA 2018 | es_PE |
dc.identifier.uri | https://hdl.handle.net/11537/14100 | |
dc.description.abstract | RESUMEN
Actualmente la empresa Agroandino S.R.L no cuenta con un Sistema de Gestión de
Seguridad y Salud, por ende los trabajadores están expuestos a diferentes riesgos y
no cuentan con un ambiente seguro para que puedan trabajar; es por eso que se
propuso la implementación de un Sistema de gestión y Salud en el Trabajo basado en
la Norma OHSAS 18001:2007 para reducir los Riesgos en el área de Producción de la
empresa Agroandino SRL-San Pablo, para lo cual se presenta una investigación
bibliográfica de los sistemas de gestión de seguridad y salud ocupacional actualmente
usados a nivel nacional e internacional. Al inicio se presenta el planteamiento general
del problema basado en la medida en que la implementación de un sistema de
seguridad y salud ocupacional en el área de producción de la empresa AGROANDINO
S.R.L reducirá los riesgos en el área de trabajo; sosteniendo que con la propuesta de
implementación del sistema se reducirán los riesgos en la empresa durante la jornada
de trabajo. Para la elaboración se utilizó el check list, guía de observación, la norma
OHSAS, ley 29783, mapa de riesgos y formatos de seguridad. Con el objetivo general
y específico se definió la elaboración de una propuesta y el procedimiento para la
implementación de la misma; posteriormente se presentó toda la metodología utilizada
en el proceso de elaboración del trabajo, siendo el tipo de investigación pre
experimental. Luego se mostró los resultados, definiéndose la propuesta de
implementación del diseño del sistema de gestión, cuya planificación se desarrolló en
base a los procedimientos y formatos requeridos por la norma, tales como IPERC
(identificación de Peligros, Evaluación de riesgos y controles), requisitos legales que
nos mantendrán encaminados al cumplimiento nuestros objetivos y programas. En
conclusión se encontró que al implementar un sistema de gestión y seguridad en el
trabajo se obtiene un B/C de 1.86 siendo, por lo tanto, viable y se recomienda
implementar un sistema de gestión de seguridad y salud en el trabajo; debido a que se
evitarán costos de multas y se obtendrá un porcentaje de beneficio económico.
PALABRAS CLAVE: Sistema de Gestión de Seguridad y Seguridad en el Trabajo, Normas
OHSAS 18001:2007, riesgo | es_PE |
dc.description.abstract | ABSTRACT
Currently the company Agroandino S.R.L does not have a Health and Safety Management System,
therefore workers are exposed to different risks and do not have a safe environment for them to
work; that is why the implementation of a Work Management and Health System based on the
OHSAS 18001: 2007 Standard was proposed to reduce the risks in the Production area of the
company Agroandino SRL-San Pablo, for which a bibliographic research of occupational health and
safety management systems currently used nationally and internationally. At the beginning, the
general approach of the problem is presented, based on the extent to which the implementation of
an occupational health and safety system in the production area of the company AGROANDINO
S.R.L will reduce the risks in the work area; maintaining that with the proposal of implementation of
the system the risks in the company during the working day will be reduced. For the elaboration, the
checklist, observation guide, the OHSAS standard, law 29783, risk map and security formats were
used. With the general and specific objective was defined the preparation of a proposal and the
procedure for the implementation of it; Afterwards, the whole methodology used in the work
preparation process was presented, being the type of pre-experimental research. Then the results
were shown, defining the proposal for the implementation of the design of the management system,
whose planning was developed based on the procedures and formats required by the standard,
such as IPERC (identification of hazards, risk assessment and controls), requirements that will keep
us on track to meet our objectives and programs. In conclusion it was found that when
implementing a management and safety system at work, a B / C of 1.86 is obtained, therefore, it is
viable and it is recommended to implement a safety and health management system at work;
because fines will be avoided and a percentage of economic benefit will be obtained.
KEYWORDS: Occupational Safety and Security Management System, OHSAS 18001:
2007 Standards, risk | es_PE |
dc.description.uri | Tesis | es_PE |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Privada del Norte | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights | Atribución-CompartirIgual 2.5 Perú | es_PE |
dc.rights.uri | https://creativecommons.org/licenses/by-sa/2.5/pe/ | * |
dc.source | Universidad Privada del Norte | es_PE |
dc.source | Repositorio Institucional - UPN | es_PE |
dc.subject | Medidas de seguridad | es_PE |
dc.subject | Empresas | es_PE |
dc.subject | Salud ocupacional | es_PE |
dc.title | Propuesta de implementación de un sistema de gestión de seguridad y salud en el trabajo basado en la norma OHSAS 18001:2007 para reducir los riesgos en el área de producción de la empresa Agroandino SRL-San Pablo | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.grantor | Universidad Privada del Norte. Facultad de Ingeniería | es_PE |
thesis.degree.level | Título Profesional | es_PE |
thesis.degree.discipline | Ingeniería Industrial | es_PE |
thesis.degree.name | Ingeniero Industrial | es_PE |
dc.publisher.country | PE | es_PE |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.11.04 | es_PE |
thesis.degree.program | Pregrado | es_PE |
dc.description.sede | Cajamarca | es_PE |
renati.discipline | 722026 | es_PE |
renati.level | https://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.type | https://purl.org/pe-repo/renati/type#tesis | es_PE |