dc.contributor.advisor | Cubas Becerra, Alejandro | |
dc.contributor.author | Chingay Paredes, Lesly Jhulisa | |
dc.date.accessioned | 2017-08-10T23:09:26Z | |
dc.date.available | 2017-08-10T23:09:26Z | |
dc.date.issued | 2017-07-12 | |
dc.identifier.citation | Chingay, L. J. (2017). Características geométricas de la carretera Sunuden – San Miguel para la seguridad vial en base a la norma de diseño geométrico DG-2014 (Tesis de licenciatura). Repositorio de la Universidad Privada del Norte. Recuperado de https://hdl.handle.net/11537/10699 | es_PE |
dc.identifier.other | 624 CHIN 2017 | es_PE |
dc.identifier.uri | https://hdl.handle.net/11537/10699 | |
dc.description.abstract | RESUMEN
La presente investigación tuvo como objetivo principal verificar las características geométricas
de la carretera Sunuden - San Miguel, con los parámetros de la norma DG-2014 para la
seguridad vial. Al realizar la clasificación de la carretera se obtuvo que es de tercera clase,
con orografía accidentada y que pertenece a la red vial departamental (ruta CA-103). Esta
carretera ha sido diseñada con una velocidad de 30 km/h. Para la investigación se han
evaluado los siguientes parámetros: longitudes tangentes, radios en curvas horizontales,
curvas de transición, sobreanchos, visibilidad, peraltes, pendientes, ancho de calzada, berma
y bombeo. Para obtener las características geométricas actuales, se realizó el levantamiento
topográfico con GPS diferencial y luego se procedió a verificar cada característica con lo
determinado en la DG-2014, llegando a obtener los siguientes resultados: para verificación de
longitudes tangente S, cumplen 10 tramos y no cumple 53; en tramos tangente O, cumplen 3
y no cumplen 56; radios en curvas circulares, cumplen 109 curvas y no cumplen 13; visibilidad
de parada en el trazo en planta, cumplen 21 tramos y no cumplen 101; visibilidad de paso en
el trazo en planta, cumplen 2 tramos y 120 no cumplen; peraltes, si cumplen 22 y no cumplen
100; visibilidad de parada en el perfil, todos los tramos son visibles; visibilidad de paso en
perfil, cumplen 10 tramos y 11 no cumplen; pendientes, 41 cumplen y 3 no cumplen; el ancho
de calzada, no cumple. Como resultado final se ha obtenido que en la mayoría de las
características de la carretera no cumplen con la norma DG-2014 y esto genera que la
carretera no sea segura y cómoda de transitar. | es_PE |
dc.description.abstract | ABSTRACT
The main objective of the present investigation was to verify the geometric characteristics of
the Sunuden - San Miguel road with the parameters of the DG - 2014 standard for road safety.
When the classification of the road was obtained, it is third class, with rugged terrain and
belongs to the departmental road network (route CA-103). This road has been designed with
a speed of 30 km / h. For the research the following parameters have been evaluated: tangent
lengths, radii in horizontal curves, transition curves, overhangs, visibility, mountains, slopes,
road width, berm and pumping. In order to obtain the current geometric characteristics, the
GPS differential survey was performed and then each parameter was checked with the DG2014,
obtaining
the
following
results:
for
verification
of
tangent
lengths
S,
they
fulfill
10
sections
and
do
not
Turns
53;
In
segments
tangent
O,
meet
3
and
do
not
meet
56;
Radius
in
circular
curves,
109
curves
and
not
13;
Visibility
of stop in the trace in plant, they fulfill 21 stretches
and they do not fulfill 101; Visibility of passage in the trace in plan, they fulfill 2 sections and
120 do not fulfill; Cantons, if they turn 22 and do not turn 100; Visibility of stop in the profile, all
sections are visible; Visibility of passage in profile, fulfill 10 sections and 11 do not meet;
Pending, 41 meet and 3 do not meet; The width of road, does not comply. As a final result it
has been obtained that in most of the characteristics of the road do not comply with the DG2014
standard
and
this
generates
that
the
road
is
not
safe
and
comfortable
to
transit. | es_PE |
dc.description.uri | Tesis | es_PE |
dc.format | application/pdf | es_PE |
dc.format | application/msword | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Privada del Norte | es_PE |
dc.rights | info:eu-repo/semantics/closedAccess | es_PE |
dc.source | Universidad Privada del Norte | es_PE |
dc.source | Repositorio Institucional - UPN | es_PE |
dc.subject | Carreteras | es_PE |
dc.subject | Seguridad vial | es_PE |
dc.subject | Geometría | es_PE |
dc.subject | Topografía | es_PE |
dc.title | Características geométricas de la carretera Sunuden – San Miguel para la seguridad vial en base a la norma de diseño geométrico DG-2014 | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.grantor | Universidad Privada del Norte. Facultad de Ingeniería | es_PE |
thesis.degree.level | Título Profesional | es_PE |
thesis.degree.discipline | Ingeniería Civil | es_PE |
thesis.degree.name | Ingeniero Civil | es_PE |
dc.publisher.country | PE | es_PE |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.01.01 | es_PE |
thesis.degree.program | Pregrado | es_PE |
dc.description.sede | Cajamarca | es_PE |
renati.advisor.dni | 26623287 | |
renati.author.dni | 73680259 | |
renati.discipline | 732016 | es_PE |
renati.level | https://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.type | https://purl.org/pe-repo/renati/type#tesis | es_PE |