dc.contributor.advisor | Mosqueira Moreno, Miguel Ángel | |
dc.contributor.author | Marrufo Urteaga, César Augusto | |
dc.date.accessioned | 2018-01-25T21:36:27Z | |
dc.date.available | 2018-01-25T21:36:27Z | |
dc.date.issued | 2018-01-08 | |
dc.identifier.citation | Marrufo, C. A. (2017). Resistencia a compresión axial y peso volumétrico del concreto con madera natural e impermeabilizada usando aceite automotriz y aguaje [Tesis de licenciatura, Universidad Privada del Norte]. Repositorio de la Universidad Privada del Norte. https://hdl.handle.net/11537/12663 | es_PE |
dc.identifier.other | 624 MARR 2017 | es_PE |
dc.identifier.uri | https://hdl.handle.net/11537/12663 | |
dc.description.abstract | La presente investigación tuvo como objetivo determinar la resistencia a compresión axial y el
peso volumétrico del concreto con madera en estado natural e impermeabilizada con aceite
automotriz y aguaje, así mismo se determinó las propiedades físico – mecánicas de los
agregados obtenidos de la cantera del río Chonta cuyo propietario es el señor José Acosta. El
concreto utilizado se elaboraron bajo el diseño de mezclas establecido por el método del comité
ACI 2001, se elaboraron un total de 134 probetas de las cuales 17 fueron para el concreto
patrón y 117 para las diferentes sustituciones de agregado por madera impermeabilizada con
aceite, aguaje y sin impermeabilizar, los porcentajes de sustitución fueron 25%, 50% y 75% con
respecto el volumen del agregado grueso, Las probetas se curaron sumergiéndolas totalmente
en agua y se determinó su resistencia a compresión axial según la NTP:339.034, para un
tiempo de curado de 7 y 28 días. La resistencia obtenida del concreto patrón a los 28 días fue
de 253.8 kg/cm
2
, y un peso volumétrico de 2232.5 kg/m
3
. La mayor resistencia se obtuvo con
la sustitución de agregado grueso en 25% por madera impermeabilizada con aguaje obteniendo
una resistencia de 130.5 kg/cm
2
y un peso volumétrico de 2220.1 kg/m
. Y la máxima
disminución del peso volumétrico se obtuvo con la sustitución de agregado en 75% por madera
sin impermeabilizar obteniendo un valor de 1817 kg/m
3
3
, y una resistencia de 34.8 kg/cm
2
. | es_PE |
dc.description.abstract | The present investigation had as objective to determine the axial compressive strength and the
volumetric weight of the concrete with wood in the natural state and waterproofed with
automotive oil and aguaje, as well as the physical and mechanical properties of the aggregates
obtained from the quarry José Acosta (River Chonta). The concrete used was developed under
the design of mixtures established by the ACI 2001 committee method, a total of 134 specimens
were made, of which 17 were for the standard concrete and 117 for the different substitutions
of aggregate by wood waterproofed with oil, and without waterproofing, the percentages of
substitution were 25%, 50% and 75% with respect to the volume of the coarse aggregate. The
specimens were cured by immersing them completely in water and their resistance to axial
compression was determined according to the NTP: 339.034, for a time of curing of 7 and 28
days. The resistance obtained from the standard concrete at 28 days was 253.8 kg/cm
, and a
volumetric weight of 2232.5 kg/m
3
. The greatest resistance was obtained by replacing coarse
aggregate in 25% with waterproofed wood with watering, obtaining a resistance of kg/cm
, and
a volumetric weight of 2220.1 kg/m
3
. And the maximum reduction of the volumetric weight was
obtained with the substitution of aggregate in 75% for wood without waterproofing obtaining a
value of 1817 kg/m
3
, and a resistance of 34.8 kg/cm
2
.
2
2 | es_PE |
dc.description.uri | Tesis | es_PE |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Privada del Norte | es_PE |
dc.rights | info:eu-repo/semantics/embargoedAccess | es_PE |
dc.source | Universidad Privada del Norte | es_PE |
dc.source | Repositorio Institucional - UPN | es_PE |
dc.subject | Resistencia a la compresión | es_PE |
dc.subject | Concreto | es_PE |
dc.subject | Madera | es_PE |
dc.title | Resistencia a compresión axial y peso volumétrico del concreto con madera natural e impermeabilizada usando aceite automotriz y aguaje | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.grantor | Universidad Privada del Norte. Facultad de Ingeniería | es_PE |
thesis.degree.level | Título Profesional | es_PE |
thesis.degree.discipline | Ingeniería Civil | es_PE |
thesis.degree.name | Ingeniero Civil | es_PE |
dc.publisher.country | PE | es_PE |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.01.01 | es_PE |
thesis.degree.program | Pregrado | es_PE |
dc.description.sede | Cajamarca | es_PE |
renati.advisor.dni | 26733060 | |
renati.advisor.orcid | https://orcid.org/0000-0003-2668-4909 | es_PE |
renati.author.dni | 70199441 | |
renati.discipline | 732016 | es_PE |
renati.level | https://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.type | https://purl.org/pe-repo/renati/type#tesis | es_PE |