Show simple item record

dc.contributor.advisorRodríguez Alza, Miguel Ángel
dc.contributor.authorAranguri Gonzales, Diego Anthony
dc.date.accessioned2017-11-23T22:08:12Z
dc.date.available2017-11-23T22:08:12Z
dc.date.issued2016-05-13
dc.identifier.citationAranguri, D. A. (2016). Propuesta de diseño de un sistema de gestión ambiental y un sistema de gestión de seguridad y salud ocupacional basado en las Normas ISO 14001:2004 y OHSAS 18001:2007, para reducir sobrecostos de la empresa Ingenacc (Tesis de licenciatura). Repositorio de la Universidad Privada del Norte. Recuperado de http://hdl.handle.net/11537/12101es_PE
dc.identifier.other670.56 ARAN 2016es_PE
dc.identifier.urihttps://hdl.handle.net/11537/12101
dc.description.abstractRESUMEN La presente investigación tuvo como principal objetivo diseñar un Sistema Integrado de Gestión referenciado en las normas OHSAS 18001:2007 e ISO 14001:2004 con el fin de reducir los sobre costos incurridos por no contar con dichos Sistemas de Gestión en la empresa INGENACC. Para llevar a cabo el diseño, como primer paso se realizó un diagnóstico de la situación actual, para determinar el grado de cumplimiento de las normas internacionales obteniendo un 6% de cumplimiento para la norma ISO 14001:2004 y un 8% de cumplimiento para la norma OHSAS 18001:2007. En el mismo sentido, se identificaron los principales sobre costos asociados a la falta de implementación de los Sistemas de Gestión indicados, siendo los siguientes: Costo por riesgo de multas de SUNAFIL, por riesgo de multas ambientales, por la no segregación de residuos sólidos y por la accidentabilidad presentada en la empresa. Tras haber determinado la situación actual de los Sistemas de Gestión, se diseñaron los principales elementos como propuestas de mejora para reducir los sobre costos actuales. Habiendo obtenido la reducción de costos (costos con propuesta vs costos actuales), la cual asciende a un 60%, se procedió a determinar la factibilidad económica de llevar a cabo dicho diseño. La evaluación económico arrojó un VAN de S/.418,790.00, TIR anual del 827% y un B/C de 3.20, significando una total viabilidad de la propuesta.es_PE
dc.description.abstractABSTRACT The main objective of this research was to design an Integrated Management System OHSAS referenced in 18001: 2007 and ISO 14001: 2004 in order to reduce costs incurred by not having such management in the company INGENACC. To carry out the design, the first step was to make a diagnosis of the current situation thas has been conducted to determine the degree of compliance with international standards. The results were a 6% compliance to the ISO 14001: 2004 and 8% compliance for OHSAS 18001: 2007. In the same vein, main costs identified associated with the failure to implement management systems indicated to be: Cost SUNAFIL risk of fines, risk of environmental fines for nonsegregation of solid waste and presented by the accident in the company. Having determined the current status of Management Systems, the main elements as improvement proposals to reduce the current costs were designed for. Having obtained the reduction of costs (costs vs. actual costs with proposal), which amounts to 60%, we proceeded to determine the economic feasibility of carrying out such a design. The economic evaluation showed a NPV of S/418,790.00, annual IRR of 827% and a B / C of 3.20, meaning an overall feasibility of the proposal.es_PE
dc.description.uriTesises_PE
dc.formatapplication/pdfes_PE
dc.formatapplication/mswordes_PE
dc.language.isospaes_PE
dc.publisherUniversidad Privada del Nortees_PE
dc.rightsinfo:eu-repo/semantics/openAccesses_PE
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/3.0/us/*
dc.sourceUniversidad Privada del Nortees_PE
dc.sourceRepositorio Institucional - UPNes_PE
dc.subjectSeguridad laboral, gestión ambiental, gestión de la calidades_PE
dc.subjectIngeniería Industriales_PE
dc.subjectDiseño Industriales_PE
dc.titlePropuesta de diseño de un sistema de gestión ambiental y un sistema de gestión de seguridad y salud ocupacional basado en las Normas ISO 14001:2004 y OHSAS 18001:2007, para reducir sobrecostos de la empresa Ingenacces_PE
dc.typeinfo:eu-repo/semantics/bachelorThesises_PE
thesis.degree.grantorUniversidad Privada del Norte. Facultad de Ingenieríaes_PE
thesis.degree.levelTítulo Profesionales_PE
thesis.degree.disciplineIngeniería Industriales_PE
thesis.degree.nameIngeniero Industriales_PE
dc.publisher.countryPEes_PE
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.11.04es_PE
thesis.degree.programPregradoes_PE
dc.description.sedeTrujillo San Isidroes_PE
renati.advisor.dni18081624
renati.author.dni47185241
renati.discipline722026es_PE
renati.jurorBaca López, Marcos Gregorio
renati.jurorMas McGowen, Ramiro Fernando
renati.jurorPortilla Tirado, Luis Alberto
renati.levelhttps://purl.org/pe-repo/renati/level#tituloProfesionales_PE
renati.typehttps://purl.org/pe-repo/renati/type#tesises_PE


Files in this item

Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess